Smok Morph 2 Starter Kit

Smok is one of the popular brands in the vape market, due to their long list of innovative hardware and accessories. They are now introducing us to the Morph 2 Starter Kit, which is the expertly-constructed product offering people a sensation like no other. It does have an IQ-S chipset, and it also has a portable build so that we can feel comfortable traveling with the kit if we choose to. The starter kit does require dual high-amp 18650 batteries, which should not be difficult to come by since they are typically needed to power up numerous mods. There is a maximum wattage output of 230W, a voltage output range of 1.2V to 8.2V, and a temperature range of 200˚F to 600˚F. There will be two different resistance ranges to work with depending on the mode you are using, VM mode ranges from 0.1ohm to 2.5, and TC mode ranges from 0.05ohm to 2.0ohm. The mod is sporting an intuitive firing button, a 0.96' OLED display screen, and two adjustment buttons. It also has a zinc-alloy chassis construction. The compatible tank does have a vape juice capacity of 7.5ml, and there is the option to use a different bulb tube with a 6.5ml capacity. It's built has a top-fill design just in case the tank is running a little low. The Morph 2 Starter Kit is available in various different colors, so choose the one you find the most attractive and start puffing away.

Compatible Products:

Smok TFV18 Replacement Coils

Product Features:

Smok Morph 2 Box Mod Features:

• IQ-S Chipset
• Dimensions: 88mm x 47.5mm x 31.7mm
• Dual High-Amp 18650 Batteries (Sold Separately)
• Wattage Output Range: 1W - 230W
• Voltage Output Range: 1.2V - 8.2V
• Resistance Range - VW Mode: 0.1ohm - 2.5ohm
• Resistance Range - TC Mode: 0.05ohm - 2.0ohm
• Temperature Range: 200°F - 600°F
• Nickel, Titanium, and Stainless Steel Wire Compatibility
• Firing Speed: 0.001s
• Zinc-Alloy Chassis Construction
• Intuitive Firing Button
• 0.96' OLED Display Screen
• Two Adjustment Buttons
• 8s Cut-Off Protection
• Atomizer Detection
• Over-Heating Protection
• Short Circuit Protection
• Low Battery Warning
• Reverse Polarity
• Over-Discharge Protection
• Type-C Port

SMOK TFV18 Sub-Ohm Tank Features:

• Diameter: 32mm
• vape Juice Capacity: 7.5ml
• Optional 6.5mL Capacity
• Pyrex Glass Construction
• Tank ConstructionSuperior 304 Stainless Steel
• Top Filling System - Press and Slide
• TFV18 Mesh Coil Series
• 0.33ohm TFV18 Meshed Coils
• 0.15ohm TFV18 Dual Meshed Coils
• Press-Fit Coil Installation
• Dual Slotted Bottom Airflow Control Ring
• Threaded 510 Connection

Package Contains:

• 1 x Morph 2 Mod
• 1 x TFV18 Tank
• 1 x 0.33ohm TFV18 Meshed Coil
• 1 x 0.15ohm TFV18 Dual Meshed Coil
• 1 x Replacement Bulb Glass Tube
• 1 x Type-C Cable
• 1 x Instructional Manual

***All specifications and descriptions are based on information provided by the manufacturer. Information provided is not representative of testing and or verification by Breazy.com and should be used at the consumer's discretion.

Disclaimer: Use At Your Own Risk! Advanced products are for experienced users with extensive knowledge of how electronic devices work along with access to the appropriate safety tools. Please ensure proper precautions are taken when using these devices. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer), and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Never leave charging batteries unattended. Breazy Inc will not be held responsible or liable for any injury, damage, or defect, permanent or temporarily that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer), and any rechargeable battery/batteries.